×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
B100/200/400/800 Series
B400P + mISDN
×
Questions about B100/200/400/800 ISDN BRI Cards
B400P + mISDN
Less
More
Posts: 4
Thank you received: 1
14 years 5 months ago #4132
by Denins.Den
Please send your SSH to me:
This email address is being protected from spambots. You need JavaScript enabled to view it.
regards!
denins.den
Less
More
Posts: 4
Thank you received: 1
14 years 5 months ago #4133
by Denins.Den
The LED change to green when calling out is working, so your card is normal, i think you should check your ISDN modern and the dialplan
14 years 5 months ago #4135
by FinStroba
No, the led does NOT turn green at any time and outgoing calls does NOT work.
Best regards,
FinStroba
14 years 5 months ago #4136
by james.zhu
hello:
I do not test that on the platform, so i am not very sure the card works or not under the platform. anyway, you must make sure the chan_misdn.conf is correct and physical connection is well established. from your log, it looks the Layer 1 is up, so double check the setting in chan_misdn.conf and ISDN modem with active status . yes, the led will be on green if there is a call over the channel; otherwise, it can not be turn on.
regards!
James.zhu
Robert
Visitor
14 years 5 months ago #4137
by Robert
hello
attention: * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:UP Blocked:0 Debug:4
your l2link is down, please show me your misdn.conf file and your dial plan
14 years 5 months ago #4138
by FinStroba
Here is my dialplan:
[general]
static=yes
writeprotect=no
clearglobalvars=no
[globals]
[default]
include => intern
include => extern
[intern]
exten => 30,1,Dial(SIP/30)
exten => 30,hint,SIP/30
exten => 31,1,Dial(SIP/31)
exten => 31,hint,SIP/31
exten => 32,1,Dial(SIP/32)
exten => 32,hint,SIP/32
[extern]
exten => _.,1,Dial(mISDN/1/${EXTEN})
And here is my misdn.conf:
[general]
misdn_init=/etc/misdn-init.conf
debug=4
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
ntkeepcalls=no
bridging=no
l1watcher_timeout=0
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=misdn
language=en
musicclass=default
senddtmf=yes
far_alerting=no
allowed_bearers=all
nationalprefix=0
internationalprefix=00
rxgain=0
txgain=0
te_choose_channel=no
pmp_l1_check=no
reject_cause=16
need_more_infos=no
nttimeout=no
method=standard
overlapdial=yes
dialplan=0
localdialplan=0
cpndialplan=0
early_bconnect=yes
incoming_early_audio=no
nodialtone=no
presentation=-1
screen=-1
echotraining=no
jitterbuffer=4000
jitterbuffer_upper_threshold=0
hdlc=no
max_incoming=-1
max_outgoing=-1
[extern]
ports=1,2,3,4
context=extern
msns=*
Forum
Telephony Cards Support
B100/200/400/800 Series
B400P + mISDN
Time to create page: 0.038 seconds